The most powerful multitrack audio/MIDI sequencer on Android with support for over 250 USB audio/MIDI interfaces, virtual instruments(*), packed with features like non-linear non-destructive editing with unlimited undo/redo, mixing, real-time effects, automation and much more!
(*) The following in-app purchases are available to enable the following features:
• USB audio interface support (you can also purchase USB Audio Recorder PRO). Please see our compatibility list here http://www.extreamsd.com/USBAudioRecorderPRO and for more information here: http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
• MIDI/virtual instrument support (enables MIDI sequencing, USB MIDI and virtual instruments)
• FX pack 1 (distortion, overdrive, speaker sim, wah wah, phaser)
• FX pack 2 (10-, 15-, 30-band graphic EQ)
• ToneBoosters pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• Autotune with two-voice harmonizer
Features:
• Multitrack audio recording/playback
• MIDI sequencing (in-app purchase required)
• Non-linear non-destructive editing with move, trim, split, cut/copy/paste, remove, cross-fade and range editing
• Virtual instruments based on SoundFonts (in-app purchase required)
• Loop playback
• Automation of all mixer and effect parameters
• Latency correction
• Import of WAV, MP3, AIFF, FLAC, Ogg/Vorbis audio files (m4a and others when running Android 4.1 or higher)
• Mastering to stereo WAV, AIFF, FLAC or OGG file
• Software monitoring for USB audio devices and some Android devices that have low enough latency
• Sample rate conversion
• Metronome
• Zoom down to the sample
• Each track has controls for volume, panning, mute, solo, arm, 3-band EQ with mid-sweep, 3 insert effects, 2 effect sends and output bus selection
• Unlimited number of tracks (*)
• Unlimited number of groups (*)
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Offline effects: fade in/out, normalize, reverse, pitch shift, time stretching
• Unlimited undo/redo for editing facilities
• Several grid options for aligning your samples (with tempo and time signature settings)
• Repeat samples with several options to create loops
• Add markers and quickly jump to them
• Projects are interchangeable with our desktop DAW Audio Evolution 5
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• In short: a complete portable recording studio!
(*) Depending on your hardware's capabilities
Requirements:
• 800x480 screen size or higher
• Android 2.3.3 or higher
Note: this app can only run in landscape. Trying to run it with apps like Ultimate Rotation Control can result in crashes.
If you have any suggestions, questions or want to report a bug, please contact us! Instead of a negative review, please have the decency to contact us so we can actually solve your problem!
Loop packs, see for example:
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack
Twitter: http://twitter.com/#!/AudioEvolution5
Facebook: https://www.facebook.com/AudioEvolutionMobile
Online manual: http://www.audio-evolution.com/manual/doku.php?id=start
To prevent your device's mic from picking up what the speaker is playing back, we recommend using either:
* a USB audio interface or
* an iRig MIC Cast: http://www.ikmultimedia.com/products/irigmiccast. The iRig is of better quality and playback is done through its headphone output. Note that hardware monitoring is not possible and you won't hear what you are recording through the headphone.
在Android上最强大的多轨音频/ MIDI音序器，可支持超过250 USB音频/ MIDI接口，虚拟仪器（*），挤满了像非线性非破坏性编辑与无限的撤销/重做，搅拌，实时特效功能，自动化和更多！
（*）应用程序内购买，可让下面的特点如下：
•USB音频接口的支持（也可以购买USB音频录音机PRO）。请参阅我们的兼容性列表在这里http://www.extreamsd.com/USBAudioRecorderPRO这里了解更多信息：http://www.audio-evolution.com/manual/doku.php?id=usbaudiosupport
•MIDI /虚拟仪器的支持（让MIDI测序，USB MIDI和虚拟仪器）
•FX包1（失真，过载，扬声器SIM卡，哇音，移相器）
•FX包2（10，15，30频段图形均衡器）
•ToneBoosters包1（路障，DeEsser，门，混响）
•ToneBoosters EQ频率分析仪
•自动调谐有两个语音泛音
产品特点：
•多轨音频记录/播放
•MIDI音序（在应用程序内购买所需）
•非线性非破坏性编辑带有移动，修剪，拆分，剪切/复制/粘贴，删除，淡入淡出和范围编辑
•基于的SoundFonts的虚拟乐器（在应用程序内购买所需）
•循环播放
•所有的调音台和效果参数的自动化
•延迟修正
•WAV，MP3，AIFF，FLAC进口，OGG / Vorbis格式的音频文件（运行Android 4.1或更高时，M4A等）
•掌握到立体声WAV，AIFF，FLAC和OGG文件
•用于USB音频设备和有足够的低延迟一些Android设备监控软件
•采样率转换
•节拍器
•放大下对样品
•每个轨道有控制音量，平移，静音，独奏，手臂，3段EQ与中期扫，3插入效果，2个效果发送和输出总线的选择
•曲目数量不限（*）
•组数量不受限制（*）
•实时效果包括：合唱，压缩，延时，延时双，反向延时，混响，镶边，噪声门，还有更多！
•离线效应：淡入/淡出，标准化，反向，移调，时间拉伸
•无限撤销/重做的编辑工具
•对准你的样品（有节奏和时间签名设置）几个网格选项
•有几个选项来创建循环重复的样本
•添加标记和快速跳转到他们
•项目是可与我们的桌面DAW音频进化5
•导出到其他DAW的通过渲染的所有曲目单独的音频文件（茎）
•总之：一个完整的移动录音棚！
（*）根据您的硬件的能力
要求：
•800x480的屏幕尺寸或更高
•安卓2.3.3或更高版本
注意：这个程序只能在横向运行。试图用像终极旋转控制的应用程序运行它可能会导致崩溃。
如果您有任何建议，疑问或想报告错误，请与我们联系！取而代之的是负面评论，请有正派联系我们，让我们可以真正解决您的问题！
环包，见例如：
https://play.google.com/store/apps/details?id=com.extreamsd.housefreepack
微博：http://twitter.com/#!/AudioEvolution5
Facebook的：https://www.facebook.com/AudioEvolutionMobile
联机手册：http://www.audio-evolution.com/manual/doku.php?id=start
为了防止捡东西扬声器播放设备的麦克风，我们建议您使用：
*一个USB音频接口或
*一个IRIG MIC演员：http://www.ikmultimedia.com/products/irigmiccast。的IRIG更好的质量和播放通过其耳机输出完成。需要注意的是硬件监控是不可能的，你不会听到你正在录制通过耳机什么。
网友评论更多