AndroFlight provides support for hang glider pilots during the flight. Map and flight instrument display can be configured in order to provide the right information to the pilot depending on the current phase of the flight. Airspaces will be displayed on the map and textual/acoustic warnings will let you know if you approach/enter an airspace. In contrast to traditional flight vario devices AndroFlight makes use of information available online, e.g in order to display height. Because there is not always a data connection available, the required data (e.g. maps) can be downloaded to the SD card before. This offline use is currently (for legal reasons) only available using maps provided by the OpenStreetMap project but online AndroFlight can use maps provided by Google as well. In order to let the pilot focus on the flight AndroFlight features an automatic take-off and landing detection. Althought its parameterization has been proven successful it can be configured. After landing AndroFlight can create an IGC file of the flight valid for participation in XC online contest. Glider type, registration number and passenger name used for the IGC file is taken from the selected flight configuration of the various you may define. AndroFlight takes care of the IGC file upload to a Leonardo flight database (paraglidingforum, DHV XC).Glider type, registration number and passenger name used for the IGC file is taken from the selected flight configuration of the various you may define. AndroFlight takes care of the IGC file upload to a Leonardo flight database (paraglidingforum, DHV XC). The IGC file - but any other IGC file as well - can be played by AndroFlight. During play the map and flight instrument display show exactly the same information as during the flight recorded in this IGC file. It can be used to analyze flight situations or simply to experience a flight (again). More information, documentation, issue tracking and road map can be found on the project website.