Remote Release allows you to "remote release" your Canon EOS DSLR from your Android device with only a USB cable.
Wi-Fi support is also present, if your camera supports Wi-Fi or you are using a go-between like the MR3040 - see further details on the DSLR Controller website ( http://dslrcontroller.com/ ) on how to setup the Wi-Fi connection.
*** PLEASE READ THE ENTIRE DESCRIPTION ***
*** IF YOUR DEVICE IS NOT COMPATIBLE THIS IS NOT MY OR THE SOFTWARES FAULT - YOUR PHONE IS MISSING NEEDED SOFTWARE OR HARDWARE ! ***
Remote releasing is using a remote control to activate the shutter of the camera. This is to prevent shaking the camera, and is often used with bulb shots and/or tripods.
This app is the little (free) brother of DSLR Controller; see http://dslrcontroller.com/ and https://play.google.com/store/apps/details?id=eu.chainfire.dslrcontroller
Remote Release also has a discussion thread on XDA-Developers.com:
http://forum.xda-developers.com/showthread.php?t=1369684
---- Features ----
- Activate the camera's shutter button from your phone over USB, just like using a remote release cable
- Enable/Disable Auto-Focus *
- Support for bulb shots (hold shutter button) *
- Support for continuous shooting (hold shutter button) *
* Depends on camera model. Requires a DryOS based camera. See DSLR Controller's device compatibility page ( http://dslrcontroller.com/devices.php )
---- Requirements ----
- An Android device with an ARMv7-A or newer CPU architecture (virtually all 1ghz+ devices)
- Supported Canon EOS DSLR
When connecting over USB:
- Not rooted: Android 3.1 or higher with USB host kernel+API support **
- Rooted: Android 2.3.1 or higher with USB host kernel support **
- The correct USB adapter, if applicable
** USB host kernel support can usually be determined by connecting a USB stick to your device, and seeing if the device recognizes it.
---- Devices ----
Please see DSLR Controller's supported devices page ( http://dslrcontroller.com/devices.php ) for device compatibility information.
----- Usage -----
-- Getting started --
- Install the application.
- Connect your camera to the phone/tablet, and turn it on. Half-press the shutter button if it was already on.
- If a popup comes up that offers to open Remote Release, press it, and move on to "Operation" below.
- If a popup does not come up, manually start Remote Release. A Superuser popup should appear, click allow. If this took more than a few seconds, Remote Release will complain it cannot find a camera, regardless if you have one connected or not. Exit the app, half-press the shutter button on the camera, then restart the app.
- If a popup appears that tells you your device is not compatible, this is the end of the line for you.
-- Operation --
After you have connected your camera and started the app, the app will show you the following:
- Camera model
- Current shutter setting (depending on camera mode)
- Current aperture setting (depending on camera mode)
- Current ISO setting (depending on camera mode)
- Current drive mode setting
Below that you will see three buttons:
- Auto-Focus button
- Shutter button
- Button to open DSLR Controller in the Market
If your lens is set to Auto-Focus and you are using a DryOS based camera, you can use the Auto-Focus button to select if focusing is triggered by pressing the shutter button. By default it is, but it is not always desired. If your lens is set to Manual-Focus, this setting has no effect.
Pressing the shutter button will take a picture on your camera. If the camera is set to bulb mode or to continuous shooting, press-and-hold the shutter button - the bulb/continuous capture will stop once you remove your finger from the screen.
远程发布让你“远程发布”你的佳能EOS数码单反相机从Android设备,只有一个USB电缆。
支持Wi-Fi也存在,如果你的相机支持Wi-Fi,或者您使用的是穿针引线,如MR3040 - 如何设置上看到数码单反控制器网站进一步的细节(http://dslrcontroller.com/)的Wi-Fi连接。
***请阅读整个说明***
***如果您的设备不兼容,这不是我的,或本软件故障 - 您的手机已失踪所需的软件或硬件! ***
远程释放是用遥控器来启动照相机的快门。这是为了防止晃动相机,并经常与灯泡的镜头和/或使用三脚架。
这个程序是DSLR Controller的小(免费)兄弟,见http://dslrcontroller.com/和https://play.google.com/store/apps/details?id=eu.chainfire.dslrcontroller
遥控释放也有XDA-Developers.com讨论主题:
http://forum.xda-developers.com/showthread.php?t=1369684
----特点----
- 从您的手机启动相机的快门按钮通过USB,就像使用遥控快门线
- 启用/禁用自动对焦*
- 支持B门曝光(按住快门按钮)*
- 支持连拍(按住快门按钮)*
*取决于相机型号。需要一个基于Dryos的摄像头。看数码单反相机控制器的设备兼容性页面(http://dslrcontroller.com/devices.php)
----要求----
- 用的ARMv7-A或较新的CPU架构(几乎所有的1GHz以上的设备)的Android设备
- 支持佳能EOS数码单反相机
当连接了USB接口:
- 不扎根:Android的3.1或USB主机内核+ API支持更高**
- 扎根:安卓2.3.1或USB主机内核支持更高**
- 正确的USB适配器(如果适用)
* USB主机内核支持通常可以通过连接一个USB记忆棒到您的设备,并查看该设备能够识别该决定。
----器械----
请参阅DSLR Controller的支持的设备页面(http://dslrcontroller.com/devices.php)用于设备的兼容性信息。
-----用法-----
- 开始 -
- 安装应用程序。
- 将相机连接到手机/平板电脑,并打开它。半按快门按钮,如果它已经上。
- 如果一个弹出来了,提供了打开远程发布,按下它,并移动到“操作”下方。
- 如果一个弹出不上来,手动启动远程发布。超级用户弹出窗口应该出现,点击允许。如果这个时间超过几秒钟,遥控释放会抱怨它不能找到一个摄像头,不管你有一个连接与否。退出该应用程序,半按相机上的快门按钮,然后重新启动该应用程序。
- 如果一个弹出窗口将会出现,告诉你你的设备不兼容,这是该行对你的结束。
- 操作 -
当你连接你的相机,开始了应用程序,该应用程序会告诉你以下几点:
- 相机型号
- 当前快门设置(取决于相机模式)
- 当前光圈设置(取决于相机模式)
- 当前ISO设置(取决于相机模式)
- 电流驱动模式设置
下面,你将看到三个按钮:
- 自动对焦按钮
- 快门按钮
- 按钮,在市场开放单反控制器
如果你的镜头设置为自动对焦和您使用的是基于Dryos的摄像头,你可以使用自动对焦按钮来选择,如果聚焦是由按下快门按钮触发。默认情况下它是,但它并不总是需要的。如果你的镜头设置为手动对焦,此设置没有任何影响。
按下快门按钮将拍摄一张照片在相机上。如果相机设置为灯泡模式或连拍,按下并按住快门按钮 - 灯泡/连续捕捉将停止,一旦你从屏幕上移开手指。
Remote Release更新内容
- Fixed for Android 5.0
网友评论更多