Monitoring app for the Digital Aquatics Reef Keeper 2.0 systems. This application is for monitoring the Digital Aquatics Reefkeeper 2.0 systems via the RKM-NET module. This app requires the 2.0 firmware to be loaded on your Digital Aquatics system and modules. With this app you can monitor all the channels logged by the NET module and even view graphs where available. The graphs do take up to a minute to download and build so be patient. It takes about the same amount of time to view the graphs on the NET module itself. If there are any problems at all or if you have any question please feel free to visit the Android section of the Digital Aquatics forum. For information on Digital Aquatics products go to http://www.digitalaquatics.com Note:Controlling channels from your mobile device can be risky. If you turn off a channel then lose connectivity either due to your phone or your home internet you will not be able to turn the channel back on until you are reconnected. For this reason I only recommend controlling lights, skimmers and non-mandatory pumps. I do NOT recommend trying to control your main circulation or sump pumps or auto top off from the device. If you lose connection you may not be able to return these to their normal state.