SignalCheck Pro下载

SignalCheck allows users to check the true signal strength of their connections. Unlike the standard Android signal bars, which typically only display the 1xRTT (voice and low-speed data) signal strength, SignalCheck will show you detailed signal information about all of your device's connections, including 1X, GSM, EV-DO or eHRPD (3G), LTE (4G), and Wi-Fi.
Special thanks to S4GRU for their tremendous support of SignalCheck from the beginning! Visit http://www.S4GRU.com for up-to-the-minute information and discussions about Sprint's Network Vision strategy, as well as talk about devices and other cellular networks. There is a SignalCheck discussion thread too!
SignalCheck will display LTE Cell ID information on most devices running Android 4.2 or higher, and some HTC devices on earlier Android versions. SignalCheck was one of the first (if not THE first) Android apps to provide this information to users. LTE band information is available for some providers, and frequencies are displayed on some HTC devices.
A configurable SignalCheck widget can be added to your home screen, showing your realtime connection type and signal strengths.
SignalCheck also displays the current connection type along with the carrier name for each connection, even while roaming. Sprint users are instantly able to see if they are on the new 800 or 2500 MHz (Spark) networks, part of Network Vision!
One of the best features of SignalCheck are the notification icon(s). A user-customizable icon shows your data connection strength in the notification area at the top of the screen, and more details can be seen in the pulldown menu. Your signal strength is always at the top of the screen along with your other icons.. no need to open the app to check your connections. The icons are customizable, showing signal bars, connection type, digital signal strength in dBm, or connection type with signal strength. A secondary icon can be enabled to always display the 1xRTT signal for users who wish to compare their signal strengths realtime. All of this is customizable from within the app! Users can configure this to automatically start when their device boots up if they choose to.
SignalCheck can also notify the user with optional audio and/or vibrating alerts when a 4G LTE connection is discovered. This is handy for users traveling in new cities, or if your carrier's network is being upgraded -- know immediately when you have a high-speed connection! Sprint users can also enable alerts to notify them when they connect to 800 SMR.
Curious as to which tower you are connected to? SignalCheck will not only show you the ID, but also the street address of the 1X tower or sector on most CDMA networks! Clicking on the address will automatically show the location through your mapping app. Users can also add custom "Site Notes" for each site they connect to.
SignalCheck has an option to quickly reset your data connections from within the app (root required on Android 4.2+). Another option allows users to start checking their signals as soon as their device boots, enabling the notification icon(s) immediately.
SignalCheck provides easy access to advanced Android screens such as Data, Debug, Engineering, EPST, and Field Trial, along with Battery Info, Field Trial, Mobile Networks, and Wi-Fi info. These screens are already available on most Android devices, but are only accessible by special dialer codes.
SignalCheck is a great compliment to the Sensorly app, allowing you to check your signal strengths and map them out so other users can see the data as well.
This app has also been referred to as Signal Check, Signal Check LTE, LTE Signal Check, and LTE Checker, among other things. Users checking their signals on the Sprint network will see the most benefit from this app as their Network Vision nationwide upgrade rolls out, but Boost, Verizon, AT&T, T-Mobile, and international users can also check their signals and see detailed information about their connections.
SignalCheck允许用户检查其连接的真正的信号强度。不同于标准的Andr​​oid信号条，通常只显示1xRTT技术（语音和低速数据）的信号强度，SignalCheck会告诉你所有设备的连接，包括1X和GSM，EV-DO或的eHRPD详细的信号信息（3G ），LTE（4G）和Wi-Fi。
特别感谢S4GRU他们从一开始的巨大支持SignalCheck的！访问http://www.S4GRU.com最多到了分钟的信息和对Sprint的网络愿景战略的讨论，以及有关设备和其他移动网络通话。有一个SignalCheck话题呢！
SignalCheck会显示在运行Android 4.2或更高版本的大多数设备，以及早期的Andr​​oid版本进行了一些HTC设备的LTE小区ID信息。 SignalCheck是第一个（如果不是第一），Android应用程序提供这些信息给用户。 LTE频带的信息是可用的一些供应商，并且频率被显示在一些HTC设备。
可配置SignalCheck小部件可以被添加到您的主屏幕，显示您的实时连接类型和信号强度。
SignalCheck也随着每个连接的运营商名称显示当前的连接类型，即使在漫游。 Sprint的用户立即就能看到，如果他们是在新的800或2500兆赫（星火）网络，网络愿景的一部分！
其中SignalCheck的最佳功能是通知图标（S）。用户可自定义的图标显示在通知区域位于屏幕顶部的数据连接强度，和更多的细节可以在下拉菜单中可以看到。你的信号强度总是在屏幕的顶部连同您的其它图标..无需打开应用程序，以检查您的连接。这些图标是可定制的，显示信号条，连接类型，以dBm为单位的数字信号的强度，或信号强度的连接类型。的第二个图标，可以启用，始终显示1xRTT的信号，谁愿意实时比较它们的信号强度的用户。所有这一切都是定制的，从应用程序内！用户可以配置这个时候，如果他们选择为自动启动的设备启动。
SignalCheck也可以通知可选的音频和/或振动提示，当4G LTE连接，发现用户。这是非常方便的用户在新的城市旅游，或者如果您的运营商的网络正在升级 - 立即知道，当你有一个高速连接！ Sprint的用户也可以启用警报通知他们，当他们连接到800 SMR。
好奇的是，这些塔楼您连接到？ SignalCheck不仅会显示你的ID，而且1X塔或部门的大多数CDMA网络的街道地址！点击地址会自动显示通过您的地图应用的位置。用户还可以在每次连接到站点中添加自定义的“网站说明”。
SignalCheck有一个选项可以快速地从应用程序（需要在Android根4.2+）内重置您的数据连接。另一种选择，用户可以立即开始他们的设备启动检查它们的信号，立即使通知图标（S）。
SignalCheck可轻松获得先进的Andr​​oid界面，如数据，调试，工程，EPST和现场试验，以及电池信息，现场试验，移动网络和Wi-Fi信息。这些画面已经可以在大多数Android设备，但只能通过特殊的拨号程序的代码访问。
SignalCheck是一个伟大的恭维的Sensorly的应用程序，让您可以检查你的信号强度，并绘制出来，以便其他用户可以看到的数据也是如此。
这个应用程序也被称为信号检查，检查信号的LTE，LTE的信号检查和LTE检查，等等。用户在Sprint网络上检查它们的信号将会看到最受益的这个应用程序作为其网络愿景全国范围内升级推出，但提振，Verizon公司，AT＆T，T-Mobile和国际用户也可以检查它们的信号，看到有关的详细信息，其连接。

优化体验，增强稳定性。