--> You need to open this app at least once after first installing or upgrading it for it to work! <--
Hearing Saver is the simple way to avoid accidentally hurting your ears when plugging in or unplugging your Android device's wired or bluetooth headset. Hearing Saver operates in the background to protect your ears automatically. It uses very little resources, and simply waits for the signal that your headset has been unplugged or plugged in.
After initial setup, Hearing Saver should work without further input from you. To setup the app, open it. You will be presented with the Setup screen. It contains a number of controls, and they each interact to allow you to customize Hearing Saver's operation. From top to bottom:
- Media/Ringer Selector Buttons - These allow you to select what the two sliders, described below, control. If you have not enabled Ringer volume control, the Ringer radio button will be disabled.
- Plugged/Unplugged Sliders - These control the volume that will be set when the headset is plugged in or unplugged, respectively. The volume that these refer to is indicated by the Radio buttons at the top.
- Enable Ringer Volume Control Checkbox - This enabled/disables Hearing Saver's ability to set your device's Ringer/Notification volume. It is off by default so you don't miss a call!
- Save Last Unplugged Volume Checkbox - If this is checked, the bottom slider will be disabled and Hearing Saver will remember the last volume you manually set while the headset was unplugged, and reset to that volume when the headset is unplugged again.
- Bluetooth Detection - Enabled by default, this tells Hearing Saver to set your volume when a Bluetooth audio device is connected/disconnected.
This app is licensed under the Apache License. More information available at http://github.com/jakebasile/hearing-saver
-- Known Issues --
- Bluetooth Disconnect happens after a long delay. This is beyond my control, as it is a delay in my code receiving the broadcast.
- Only works on Unplug on the HTC Incredible. This is because HTC broke the standard method that I hook into in order to change the volume.
- Sometimes doesn't upgrade very well. If you are having problems, please try uninstalling and reinstalling.
- >你后的第一次安装或升级它,它的工作至少需要一次打开这个应用程序! < -
听力保护程序是一个简单的方法来避免意外地插入或拔出你的Android设备的有线或蓝牙耳机时,伤害你的耳朵。听力保护程序在后台运行自动保护您的耳朵。它使用很少的资源,并简单地等待您的耳机已拔出或插入的信号。
初始设置后,听力保护程序应该无需您再输入。要设置应用程序,打开它。你将看到设置屏幕。它包含了一些控制,以及他们各自互动,允许您自定义听力保护程序的运行。从上至下:
- 媒体/振铃选择器按钮 - 这允许您选择以下哪两个滑块,描述的控制。如果你还没有启用振铃音量控制,振铃单选按钮将被禁用。
- 堵塞/插电推子 - 这些控制当耳机插入或拔出,分别将设置音量。这些参考的体积是由在顶部的单选按钮指示给。
- 启用铃声音量控制复选框 - 这使/禁用听力保护程序的能力,将设备设置的铃声/通知音量。它默认是关闭的,这样你就不会错过任何一个电话!
- 保存最后不插电卷复选框 - 如果该选项被选中,底部的滑块将被禁用,听力保护程序会记住你手动设置最后一卷而耳机是拔掉,并重置到该卷当耳机被拔掉了。
- 蓝牙检测 - 默认情况下启用,这说明听力保护程序时,蓝牙音频设备连接/断开,将音量设置。
这个程序是在Apache许可证下授权。在http://github.com/jakebasile/hearing-saver提供更多信息
- 已知问题 -
- 经过长时间的延迟蓝牙断开发生。这已经超出了我的控制,因为它是在我的代码接收广播的延迟。
- 只能对拔下的HTC不可思议。这是因为HTC打破了,我钩到,为了改变音量的标准方法。
- 有时候不升级得非常好。如果您有问题,请尝试卸载并重新安装。
Hearing Saver更新内容
- Better Support for Low Resolution Screens (Thanks bhm!)
- Happy Thoughts
网友评论更多