With the tool you can calculate the gear revolutions from a rc-heli (or rather the head speed). You have to describe the engine parameter and the gear from your helicopter.
Important gear parameters are revolutions per minute per volt (Kv), the engine voltage and the ESC value in percent.
The gear is defined with cog wheel positions at the shaft and the cogs from the cog wheel.
The program has presets for the helicopter: AcrobatSE, Align T-Rex 250SE/450/500/700, Compass Atom 6hv/7hv, EXI 250, GAUI Hurricane 425, GAUI X5, Herobo Embla 450E, MSH Protos, Outrage fusion 50, SAB Goblin 700, Henseleit TDR, Nova7.0
How to use:
---------------
Gear wheel:
- short touch activates / deaktivates the gear wheel
- touch and move changes the cog count
- long touch (1sec) without move changes the gear wheel in a gear belt
Shaft name:
- Change it by touching the name or rpm.
Versionhistory:
=============
V 1.4.3
+ Now you can use 4 or 7 shafts.
+ new presets: Henseleit TDR, Nova 7.0
V 1.4.2
+ small changes for android4
+ new presets: Herobo Embla 450E, SAB Goblin 700, EXI 250
V 1.4.1
+ new presetss: Align T-Rex 700, Outrage fusion 50, Compass Atom 6hv/7hv
+ Look is now android version independent.
+ Menu with icons
- Bugfix in email presets.
V 1.4.0
+ Shows ratio for pinion to mainshaft and tail to mainshaft (xx:1)
+ save with question and only if you made changes
+ presets now with prefix '~'
+ now you can't modify presets. Changes are stored with no prefix.
+ cogs from wheel can selected a bit better
+ new presets: GAUI X5, MSH Protos
V 1.3.4
+ Gear parameter revolution per minute per volt has now 5 digits
V 1.3.3
+ Graphic improvements (number wheel)
V 1.3.1
+ Menu Help (show the text 'How to use')
- Bugfix: Units
V 1.3
+ new Presets: AcrobatSE , T-Rex 250SE, T-Rex 500 (thanks to Andreas und Rene)
+ Added gear belt to bridge a shaft. (nice idea from Andreas)
+ Added shaft typ name.
+ move to SD card (with Android 2.2)
- Bugfix: after changing engine parameter all values are recalculated
- Bugfix: Values greater than 999999 RPM will be visible as >999999 and don't destroy the layout.
- small patches
V 1.2
+ cogs from wheel can now selected precisely (Thanks for comment from Brian and MarkD)
+ Presets for: Hurrican 425, T-Rex 450 (Thanks for good idea from Brian)
+ In the menu you can select 'email presets' to send me your presets. So i can add them to the next version. By using the menu item, you email client opens with all preset values. You can remove rows you don't want to send. (Help me to generate a good preset list.)
+ Added toast for load and save.
- Bugfix: Load now recalculates all values correct.
V 1.1
- now with function load, save and delete
V 1.0.1
- Bugfix: small display resolution (HTC Wildfire)
- Number input now nicer
有了这个工具,你可以计算出齿轮转数从RC-直升机(或者说头速度)。你必须描述你的直升机的发动机参数和齿轮。
重要的齿轮参数是每伏每分钟转数(Kv值),发动机的电压和ESC(%)值。
定义与嵌齿轮在轴的位置,并从嵌齿轮的齿轮的齿轮。
该方案具有预设的直升机:AcrobatSE的,拓T-REX 250SE/450/500/700,北斗原子6hv/7hv,EXI 250,GAUI飓风425,GAUI X5,Herobo恩布拉450E,MSH普鲁托斯,愤怒融合50,SAB地精700,亨氏TDR,Nova7.0
如何使用:
---------------
齿轮:
- 短触摸激活/ deaktivates齿轮
- 触摸和移动的齿轮计数
- 长时间没有移动变化的齿轮在齿轮带触摸(1秒)
轴名称:
- 改变它通过感人的名称或rpm。
Versionhistory:
=============
V 1.4.3
现在,您可以使用4或7轴。
+新的预设:亨氏TDR,新7.0
V 1.4.2
+小的变化android4
+新的的预设:Herobo恩布拉450E,SAB,EXI 250精700
V 1.4.1
新presetss拓T-REX 700,愤怒的融合,北斗原子6hv/7hv 50
+现在看是独立的android版本。
+菜单图标
- 修正在电子邮件的预设。
V 1.4.0
+显示比小齿轮与主轴的主轴和尾(某某:1)
+保存的问题,只有当你做了修改
+预设了带有前缀'〜'
现在你可以修改预设。更改存储不带前缀。
+从车轮上的螺丝钉可以选择一个好一点
+新的预设:GAUI X5,MSH普鲁托斯
V 1.3.4
+齿轮参数的革命,每伏每分钟有5位
V 1.3.3
+图形改进(轮数)
V 1.3.1
+菜单帮助(显示文本“如何使用”)
- 修正:单位
V 1.3
+新的的预设:AcrobatSE,T-REX 250SE,T-REX 500(安德烈亚斯和刘若英)
+添加齿轮皮带,,弥合轴。 (安德烈亚斯不错的主意)
+添加轴(典型值)的名字。
+移动到SD卡(采用Android 2.2)
- 修正:改变发动机参数后,重新计算值
- 修正值大于999999 RPM> 999999将是可见的和不破坏布局。
- 小补丁
V 1.2
+从车轮上的螺丝钉可以选择精确(感谢您征求意见布赖恩和MarkD的)
+预设的:Hurrican 425,T-REX 450(好主意布赖恩的感谢)
+在菜单中,你可以选择“电子邮件预置'给我你的预设。所以,我可以将它们添加到下一个版本。通过使用菜单项,你的电子邮件客户端打开所有的预设值。你可以删除你不想发送的行。 (帮助我产生了良好的预设列表中。)
+增加了对负载的烤面包和保存。
- 修正:负载重新计算所有的值是否正确。
V 1.1
- 现在与功能加载,保存和删除
V 1.0.1
- 修正:小的显示分辨率(HTC野火)
- 现在更好的数字输入
RC-Heli-Gear-Ratio更新内容
V 1.4.5
+ new presets for SAB Goblin 570 and Align T-Rex 450 PRO
V 1.4.4
+ A few minor GUI improvements.
+ adjust preset T-Rex700
V 1.4.3
+ Now you can use 4 or 7 shafts.
+ new presets: Henseleit TDR, Nova 7.0
V 1.4.2
+ small changes for android4
+ new presets: Herobo Embla 450E, SAB Goblin 700, EXI 250
V 1.4.1
+ new presets: Align T-Rex 700, Outrage fusion 50, Compass Atom 6hv/7hv
+ Look is now android version independent.
+ Menu with icons
- Bugfix in email presets.
..
网友评论更多